US SUPREME COURT DECISIONS

COLLAR COMPANY V. VAN DUSEN, 90 U. S. 530 (1874)

Subscribe to Cases that cite 90 U. S. 530

U.S. Supreme Court

Collar Company v. Van Dusen, 90 U.S. 23 Wall. 530 530 (1874)

Collar Company v. Van Dusen

90 U.S. (23 Wall.) 530

Syllabus

1. The purpose of a reissue is to render effectual the actual invention for which the original patent should have been granted, not to introduce new feature.

Therefore, in an application for reissue, parol testimony is not admissible to enlarge the scope of the invention beyond what was described, suggested, or substantially indicated in the original specification, drawings, or Patent Office model.

2. Whether a reissued patent is for the same invention as the original depends upon whether the specification and drawings of the reissued patent are substantially the same as those of the original, and if not, whether the omissions or additions are or are not greater than the law allows to cure the defect of the original.

3. Where the original patent for improvement in paper shirt collars, granted to Andrew Evans, May 26, 1863, stated the invention to consist first in making the collars of parchment paper, or paper prepared with animal sizing, and second in coating one or both sides of the collar with a thin varnish of bleached shellac to give smoothness, strength, and stiffness and to repel moisture, the claim being for "a shirt collar made of parchment paper and coated with varnish of bleached shellac, substantially as described and for the objects specified," held that a reissue thereof which describes a paper other than parchment paper or one prepared with animal sizing and which does not require either side of the collars to be coated with a varnish of bleached shellac for any purpose, the claim being for "a collar made of long-fiber paper, substantially such as is above described," is for a different invention from that embodied in the original patent.

4. Articles of manufacture may be new in the commercial sense when they are not new in the sense of the patent law.

5. New articles of commerce are not patentable as new manufactures unless it appears in the given case that the production of the new article involved the exercise of invention or discovery beyond what was necessary to construct the apparatus for its manufacture.

6. It appearing that the collars made by Evans, apart from the paper composing them, were identical in form, structure, and arrangement with collars previously mode of linen paper of different quality, and of other fabrics, and that Evans did not invent the special paper used by him, nor the process by which it was obtained, held that he was not entitled to a patent for the collars as a new manufacture.

7. The relations of an employer and a party employed by him in regard to the origin of inventions stated.

8. The object in turning clown a collar on a curved line instead of a straight line is precisely the same whether the collar be all paper, paper and linen, or all linen. Hence, where it appeared that linen collars had chanrobles.com-red

Page 90 U. S. 531

been turned over on a curved line to prevent wrinkling and to afford space for the cravat, held that it was not patentable to apply the same mode of turning down to collars of paper or paper and linen.

Reissued patent of Andrew Evans, for "improvement in paper shirt collars," July 10, 1866 (original May 26th, 1863), and of Solomon Gray "for improvement in turnover shirt collars," March 29, 1864 (original June 23d, 1863), pronounced invalid.

Appeal from the Circuit Court for the Southern District of New York in which court the Union Paper Collar Company filed a bill against Van Dusen to enjoin him from making shirt collars out of a certain sort of paper which he was using and to which they claimed an exclusive right, and also from turning over the collars so made by a particular contrivance which he was also using and of which, as of the fabric of the collar, the company claimed a monopoly.

The claim by the company of exclusive right as to the fabric of the collars -- that is to say, the sort of paper out of which they were made -- was founded on a grant to them of a patent, reissued to one Andrew Evans; the claim of similar right as to the device by which the collar was turned over was founded on the grant to them of a patent reissued to a certain Solomon Gray.

Van Dusen, admitting the use both of the special sort of paper and of the device for turning the collars over, set up:

I. AS TO THE EVANS PATENT, THE ONE, NAMELY, FOR THE FABRIC:

1. That the reissue to Evans was void as not being for the same invention as the original patent.

2. That whether or not, both original and reissue were void for want of novelty.

II. AS TO THE GRAY PATENT, THE ONE, NAMELY, FOR THE DEVICE:

1. That it too was void for want of novelty.

The reader will, of course, remember that the Patent Act authorizes the issue of a patent only when a person has invented or discovered some "new manufacture, or some new and useful improvement thereof, not known or used by others," and also that while authorizing in certain cases the reissue with an amended specification of an original chanrobles.com-red

Page 90 U. S. 532

patent, where the specification has been defective, the act contemplates that the reissued patent shall secure no other than "the same invention" meant to have been secured by the original. [Footnote 1]

The case was thus:

I. As to the Evans patent and reissue, the fabric for making shirt collars. Paper being made out of linen, among other things, and some sorts of paper being more stiff or more tough than others, it had been observed long prior to the grant of any patent on the subject that shirt collars could be made out of the stiffer or more tough sort of papers, and that the collars, if used but for a short time and not closely looked at, might pass for linen collars. A man named Olmstead, the "property man" of a band of negro minstrels who used to costume themselves in fantastic style, had used them so far back as 1851 to dress his minstrels when performing at a place called "White's Varieties," in the Bowery, New York. He said:

"In the year mentioned and afterwards, we made wooden blocks or patterns from linen collars, and laid the blocks on paper. We would then mark the paper with a lead pencil, and afterwards cut out the collar from the paper by the marks, with a pair of scissors. For stiff or 'stand-up' collars of large size and fantastic shape -- such as we used when we wanted collars with long points and to come up nearly to the men's eyes -- we used Bristol boards, such as artists use. The outside of that board is glossy. The other side, which is not glossy, the performer put next his face. The gloss prevented the burnt cork, with which the so-called negro minstrels (who are all white men) are blackened, from sticking to the paper. Turned-down collars we made out of paper. We did this by simply pinning the paper to a cravat and then laying it on a board and turning it over the cravat. Sometimes these collars were cut in two at the back -- that is to say were made out of two pieces of paper. When we wanted fancy collars, we would prick the Bristol board or paper. The holes looked like stitches. Sometimes we would paint them pink or blue, or in stripes, so as to be like

Page 90 U. S. 533

colored linen or linen, with blue or pink stripes. The fancy collars were worn, of course, only on the stage. But the white ones, our men -- who as a class are lazy fellows -- would sometimes wear in the street. On the stage we could, with care, wear the collars several times. In the street, only once or twice. We got the Bristol boards and paper out of which we made these collars at Rayner's, a stationer, in the Bowery. I sold these collars for eight or nine years, and from two to five cents. I did not go regularly into the business because I had no capital."

Subsequently a person named Hunt made a business of selling paper collars, and got a patent for the particular sort which he made. This sort was made out of paper applied to some woven fabric, the paper, which was worn on the outside, giving to the loose and limber fabric of the woven fabric rigidity, and the general appearance of a starched linen collar, while the woven fabric, worn next the skin, sustained and gave strength to the paper. Nevertheless these collars were expensive and had a harsh and inelegant look. In addition, they wanted pliability, and when turned over were apt to crack and form a roughened edge.

However, as already said, paper had long been made having different degrees of toughness. Some paper -- "short-fiber paper," as it is called, the sort commonly used for the inferior class of newspapers -- paper made from wood, or from poor cotton rags ("soft stock," as it is called) or from old paper itself, or by imperfect processes -- is brittle and tears easily. But another sort, "long-fiber paper," that made from linen rags, or linen canvas, manila rope, Kentucky bagging &c. ("hard stock," as it is called), and from which, by some variation in the machinery producing it, and with more time, are produced the papers known as bank note paper, cartridge paper, silk paper, and tissue paper, among the thin papers, and parchment paper, drawing paper, and Bristol boards, among the thick, is highly tenacious and some of it quite pliable.

A reference to the general features of the process of papermaking by mechanical means will assist comprehension of subsequent parts of the case. chanrobles.com-red

Page 90 U. S. 534

After the "stock" -- best rags or what else -- is sorted and cut, it is generally cleaned by boiling, and finally put, with the requisite quantity of water, into the "beating engine," where it is beaten or ground into pulp. The beating engine is simply a vat divided into two compartments by a longitudinal partition, which, however, leaves an opening at either end. In one compartment a cylinder revolves, called the "roll," its longitudinal axis being at right angles to the length of the vat. In this cylinder, and parallel with its axis, are inserted a number of blades or knives which project from its circumference. Directly beneath the roll, upon the bottom of the vat, is a horizontal plate, called the bed-plate, which consists of several bars or knives, similar and parallel to those of the roll, bolted together. The roll is so arranged that it can be raised or lowered, and also the speed of its revolutions regulated at pleasure. The vat being filled with rags and water, in due proportion, the mass is carried beneath the roll, and between that and the bed-plate, and passing round through the other compartment of the vat, again passes between the bed-plate and roll, and so continues to revolve until the whole is beaten into pulp of the requisite fineness and character for the paper for which it is intended. When the beating first begins, the roll is left at some distance from the bed-plate, and is gradually lowered as the rags become more disintegrated and ground up. The management of the beating engine is left to the skill and judgment of the foreman in charge. The knives may be sharp or dull, the roll may be closely pressed upon the bed-plate or slightly elevated, the bars and knives may have the angles which they make with each other altered, so that they either cut off sharply, like the blades of scissors, or tear the rags more slowly as they pass between them. The duration of the beating also varies according to the nature of the pulp, the length of fiber required, the condition of the knives &c.; and the speed of the revolutions given to the roll is varied in like manner.

After the pulp has been beaten until the foreman judges chanrobles.com-red

Page 90 U. S. 535

that it is of the right length of fiber and quality for the paper desired, it is drawn off from the engine and first passes through the "screens," a kind of sieve, which removes lumps and impurities. The pulp is then poured out upon the wire cloth, the water draining through the meshes of the wires, an operation which is aided by "suction boxes" that exhaust the air and suck the water out of the pulp. The thickness of the paper is mainly regulated by the amount of pulp poured out upon the wire, it being kept from flowing over the edge by raised guards. The pulp is carried by the motion of the wire beneath a succession of rollers, the first light and the last heavier, until a heavy roller covered with felt carries it off the wire by its adhering to the felt, and it then passes through heated rollers until it comes out pressed into paper. It is finished by passing under calender rolls, and given more or less gloss as may be required. It is usually sized and colored in the vat before the pulp is beaten. A white color is obtained by bleaching the rags, selecting white rags if possible for the original stock, taking pains to use clear water, and adding blue coloring matter if a yellowish white is not desired.

There seemed to be no essential difference in the principles on which the two sorts of paper -- short fiber and hard fiber -- were made. The "stocks," as already said, were different. The machines using them, however, had no mechanical principles different for the two sorts of paper. For long fiber paper, the knives used in the process of pulping must be dull, and the process of beating must be long -- forty four hours being commonly given. For the short fiber paper, the knives may be dull and the process of beating may be short -- four hours suffices. To produce a thick paper, the device of doubling the sheet, where the machine is a cylinder machine, has long been resorted to. And of course where the paper is thick and of long fiber, it yields the water in it less readily than when it is thin and of short fiber, and more power must be brought on the pulp in order to expel the water. In the Fourdrinier machine -- where the principle of suction is used -- stronger chanrobles.com-red

Page 90 U. S. 536

suction, it need hardly be said, is required to extract the water in the case of the thick paper than of the other.

The matter of coloring is, of course, a matter of taste.

In all parts of the subject, however, there is great room for skill, the thicker, more tenacious, and more sightly paper being produced in different degrees of excellence according as the proper "stock" is used, as the papermaking machines are good and as they are scientifically used. And as the demand for the thicker and more tenacious and pliable papers is comparatively limited and the manufacture of each of its branches to some degree a special business, there are much fewer machines for making it, and much fewer makers of it than there are machines for making ordinary paper and makers of it.

Without any effort, therefore, to obtain or to produce a paper other than that already known and in use, Evans, who was not a papermaker at all, on the 15th of May, 1863, got an original patent for an "Improvement in Shirt collars." His specification said:

"The nature of my invention consists:"

"First. In making shirt collars of a fabric known to the trade as 'parchment paper,' or paper prepared with animal sizing, which may be manufactured cheaper than a fabric composed of paper and cloth, is sufficiently tough and strong to form tenacious button holes, is susceptible of a smoother surface and polish than cloth paper, and can be turned over without cracking and forming a roughened edge &c."

"Second. In coating one side or both sides of paper shirt collars with a thin varnish of 'bleached shellac,' which not only adds smoothness, strength, and stiffness to the fabric, but also being a repellent of water, prevents perspiration or other moisture from entering the collar. The shellac, moreover, renders the surface of the paper so hard and smooth that it wears much longer without being soiled by exposure to dust or damp. I make my collars of any of the patterns or shapes in general use, either 'stand up,' or 'turn over,' and provided with button holes, by means of which they are attached to shirts in the usual manner."

"I first take the 'parchment paper,' or paper prepared with

Page 90 U. S. 537

animal sizing, and cover one side or both sides of it with thin varnish of 'bleached shellac,' and allow it to dry. The paper is then passed between polishing rollers, such as are in general use for polishing paper or cloth. And this operation finishes the fabric ready to be made into collars. The collars are cut out and the buttonholes punched by dies with great rapidity."

"My invention constitutes, I think, a great improvement in the art of making shirt collars, producing a cheaper and better article of its kind than any known or used before."

"Having thus described the nature and operation of my improvement, what I claim as new, and desire to secure by letters patent, is:"

"A shirt collar made of parchment paper and coated with varnish of bleached shellac, substantially as described and for the objects specified."

These collars made of parchment paper coated with varnish of bleached shellac were however open to objections. They did not look at any time very much like starched linen, became discolored after a little time, and showed plainly that they were not linen. The moisture of the skin coming against the sizing caused them to emit an odor not pleasant. Moreover the "Byron" or turned down collar was now coming into vogue, and the parchment paper with its coating of shellac answered even less well for it than it did for the stiff or stand-up collar.

Evans now put himself into communication with different papermakers to get a sort of paper better suited for his purposes than any of the different sorts previously made -- something which while it was paper and could be produced cheaply should yet have such a thickness, tenacity, pliability united with strength, and have moreover that polish of surface, and that exact bluish tint which is found in the best starched linen -- as distinguished from yellowness and from dead white -- which would deceive even critical observers who had no opportunity of judging otherwise than by the eye. No such exact variety of paper had yet been made, nor, so far as appeared, had been attempted to be made. He went to numerous paper mills. He conferred with numerous papermakers. He spent much money. He made chanrobles.com-red

Page 90 U. S. 538

many suggestions. The manufacturers studied the matter carefully; got the exact sort of "hard stock" that they thought would produce the special sort of paper that he wanted -- and to which, in advance of its coming forth, they gave the name of "collar paper" -- made certain alterations in the machinery of their mills, and went to work, some producing their "failures," and some their approximations in close degree to what he wanted. Evans would sometimes come to the mills, "and had a great deal to say."

The following extract from one or two of his letters illustrates what sort of instruction he was constantly giving. To one manufacturer, in acknowledging the receipt of some paper, he says:

"The paper as regards color is all right. It is not, however, thick enough to make the stand-up collar. It will answer for the turn over collar. I have now on hand stock enough that you have sent me to make 40,000 collars, but it is only suitable for the turn over collar. I am very much in want of some thicker stock to make a stand-up collar. You don't seem to understand by my letters just what I want, and yet I try to explain explicitly for your information. What I wish you would do is for you to come to Boston and see my place of business, and let us have a good substantial talk over the matter. It will take only one day, and then I can explain to you just what I want. I want to show you what I have on hand, and show you by comparison what I want for an alteration. If you cannot come, or do not think it advisable to do so, please write me by return mail, and then I will send another order and take the chance of its being right. I have not, however, had any stock right to cut one style of collar which is very much wanted -- the stand-up collar."

In another letter he says:

"I want the paper of the style marked A.S., the hard finish, so that it may be strong. The color of the last two lots was just right. You need not make any variation as to color. It was perfect. Only give the paper to me thicker. Do not make the quantities of each lot too large, for fear they will not be just right. I was sorry not to see you in Boston. I could explain to you much better by seeing you than by writing. Just please

Page 90 U. S. 539

see if you understand me this time. It is so difficult for me to explain by letter. I wish I could see you."

In a third he says:

"I am not positive that what you make will be just what I want when finished. Instead of seven hundred pounds of each size, I wish that you would not make more than two hundred pounds of each, that I may see if it is just right. This is still an experiment, and I have already lost considerable money in experimenting in my paper. Could I but see you one half-hour at my place, to explain to you, and show you by comparison, there would be no doubt in the mind of either of us what is wanted. Don't be discouraged. They like my collar as it is, but I am going to have it more perfect. I want some stock heavy enough, thick enough, strong enough, handsome enough, to make my stand-up collar, but I want it just right before you make me up too large a quantity."

At last Evans got just the paper that he wanted.

In this state of facts, he assigned his patent to the Union Paper Collar Company, and they applied for and got a reissue.

The reissue, like the original patent, was for an "improvement in paper shirt collars," and ran thus:

"Be it known that Andrew Evans, of Boston &c., did invent a new and useful improvement in shirt collars, and that the following is a full, clear, and exact description of the same."

"Previous to the invention of the said Evans, collars were made of paper applied to some woven fabric, the paper serving the purpose of giving to the loose and limber fabric the body rigidity or stiffness and general appearance of a starched linen collar, while the backing of cloth or fabric gave it the necessary strength or resistance. The increasing cost of the backing and the difficulty attending the manufacture render the collars, intended to be worn as a general thing but once, too expensive to answer the purpose they were designed for. The object of the said Evans was, therefore to make a paper collar in which the cloth backing may be dispensed with, and which he did as follows:"

"Said Evans discovered as the result of many experiments that in order to produce a really good collar, the paper must possess

Page 90 U. S. 540

the following qualities, viz., strength to withstand the usual wear and tear, particularly where button holes are used, without excessive thickness, such as to destroy the resemblance to a starched linen collar, and tenacity or toughness, with pliability sufficient to allow the collar to be folded upon itself without cracking at the fold, and the pureness of color and necessary polish to make it resemble starched linen."

"He made his collars out of a paper which he produced, or caused to be produced, in which he combined these qualities, which paper was made of a long fiber, substantially, in this respect, like banknote paper, but of about the same thickness as that of an ordinary collar and of a pure shade or color such as to resemble starched linen."

"By means of the length of fiber in the material, he was enabled to obtain, from the degree of thickness above specified, a sufficient degree of strength, tenacity, and pliability to make a collar practically useful for wear without interfering with the resemblance in appearance to a linen collar. A sample of the paper which he thus found suitable and used is shown, filed with the original application of the said Evans for his patent, above referred to."

"To produce a paper having the above mentioned qualities, what is known as 'hard stock' should be used in larger proportion than is required for other descriptions of paper, except for that which is known as banknote paper, and in the process of pulping the stock, dull knives should be used, and the distance of the knives or beaters, and their mode of striking the knife bar, should be so arranged as to draw out the pulp instead of chopping it short, constituting what is known as the 'long beating' process, and this long beating should be continued for a great length of time, so that the fiber shall be not only long but fine, and thereby the paper not only be more strong but more smooth and even, and the fiber become bedded in the thickness of the paper so as not to mar the surface."

"After the stock is thus pulped, the paper, if made upon a cylinder machine, may be run off in two or more sheets of pulp, which may be united as they run from several cylinders -- and pass together, one over the other, under the press or rolls -- into one sheet of the required thickness; or one sheet may be first run off upon a reel and then united in the same manner with another sheet running from the cylinder, and both passing under

Page 90 U. S. 541

the rolls together; but the former mode is found preferable in practice, as the several sheets are in that case of equal degrees of moisture, and therefore form in that state a more perfect union. In case a single sheet is used, made upon a cylinder machine, as its thickness and length of fiber tend to retain the moisture, great care must be taken to expel the water from the pulp."

"In case a Fourdrinier machine is used, the paper may be made of the required thickness from a single sheet of pulp; but the 'wire' on which the pulp is formed should be supplied with extra suction boxes to remove the water, and its forward motion should be much slower than in the manufacture of ordinary paper, whilst the lateral or vibratory motion of the wire should be as rapid or more rapid than usual in order to afford greater time and motion for extracting the moisture from the pulp."

"Care should also be used to give to the paper in the pulp the slight bluish tinge which is found in starched linen, and to prevent its having a dead or yellowish white color."

"The invention of said Evans is not confined to the use of any specific proportion of 'hard stock,' nor to any specific time or mode of 'long beating' of the pulp, nor any specific method of running off or uniting the sheets of pulp, or of exhausting the moisture, or of giving the required tint; but it is believed that the quality of stock to be used, the process by which the length of fiber and the required shade of color are produced, will be readily understood by paper manufacturers, having regard to the above description and the purposes for which the paper is designed."

"This paper may be prepared with animal sizing, and when so prepared it is known in the trade as parchment paper, or such sizing may be dispensed with."

"The paper may also be covered on one or both sides with a thin varnish of bleached shellac and allowed to dry, or such varnishing may be dispensed with. The paper, having been passed between polishing rollers such as are in general use for polishing paper or cloth, is ready to be made into collars."

"The collars are put out, and the button holes, if any, are punched by dies, and the collar may be indented along a line running parallel with the exposed edges, so as to imitate the stitching of sewed collars, and of such various patterns or shape as are in use, either 'stand up' or 'turn over,' and provided, if

Page 90 U. S. 542

required, with button holes, by means of which they might be attached to shirts in the usual manner."

"What is claimed under this patent is the invention of the said Evans, and desired to be secured by letters patent, as a new article of manufacture, is:"

"A collar made of long-fiber paper substantially such as is above described."

As to whether the manufacture of collar paper was a novelty, the evidence was contradictory. Mr. Crane, the manufacturer of it and a person long established in the business of papermaking, said:

"It was at that time a new manufacture. We never heard of it before. We had heard of the paper and cloth collar, but never of collar paper made expressly for collars before. I can't recall any paper it resembles except Bristol board, and this is an entirely different thing, when you come to examine it. I have often thought it over. If I have found paper as thick as that, it lacked either the color, the strength, or the flexibility. I have found paper that separately possessed the various qualities which are combined in that; thus, a sheet of banknote paper would possess its strength and flexibility; a sheet of writing paper would possess its whiteness and smoothness; a sheet of pasteboard its thickness. It was from six to twelve months from the time we began our experiments before we succeeded in making collar paper such as was satisfactory."

Other witnesses supported this view, one of them stating that "a collar paper, when first shown, was looked on by him as a marvel in papermaking," and others stating that the use of collar paper had been followed by the application of paper to uses radically different from those previously known -- paper stronger, thicker, and more flexible than any before made.

But this view of novelty was contradicted by numerous experts of the defendant. The testimony, for example, of one Derrickson, a paper manufacturer of New York, who became an apprentice to the papermaking business in 1823, and had made it his business more or less ever since, will chanrobles.com-red

Page 90 U. S. 543

serve for an example of nearly what they all swore. He said:

"I have seen paper like this paper, called collar paper, made twenty-five years ago. There is no difference in it from other papers, more than it is made in a double cylinder and is double, the same as any other heavy paper is. It is strong; and, generally speaking, the heavier the paper is, the stronger it is also. I have seen better paper than the complainant's collar paper made at Pennypack, Pennsylvania, when I was an apprentice. It was called thick writing paper, and was used for ledgers. There is no quality of toughness, capacity of being turned without cracking, or thickness, which makes the collar paper substantially different, so far as I see, from the qualities of other papers long in use in this country. Long fiber paper has been a common article of manufacture in the United States longer than I can remember. It has been known in the market as bank note, bond paper, cartridge paper, drawing paper, silk paper, tissue, manilas, and tissue paper."

"There is no essential difference in the process and means used to produce collar paper, that I know of, and the process and means employed to produce other thick, strong, pliable long fiber papers which I have enumerated. The same machinery answers for one as the other. No difference in stock or in the essential manner of treating it. The specification in the reissue of Evans's patent gives me no new information as to papermaking."

Numerous witnesses supported and amplified this view.

So much for the Evans part of the case -- the part relating to the fabric. Now as to the Gray part of it, the reissue for turning the collar over. This reissue was granted June 23d, 1863, and was thus:

"Be it known that I, Solomon Gray of Boston &c., have invented certain new and useful improvements in turn over shirt collars, and I do hereby declare the following to be a full, clear, and exact description of the same, reference being had to the accompanying drawings making a part of this specification, in which:"

"Figure 1 (on page 90 U. S. 545) represents the outline of the collar

Page 90 U. S. 544

before it is turned over, with lines dotted thereon to illustrate the mode of folding it over and the effect produced thereby."

"Figure 2 (on page 90 U. S. 546) represents a perspective view of the same, turned over and brought into a circular form, as it would be on a person's neck. The same letters indicate like parts in both drawings."

"In the making of turn-over shirt collars of paper or of cloth and paper combined, it is exceedingly difficult to fold the material so that, when turned over on the arc of a circle, it will present a regular line; this cannot be done by the eye, but must be done by a gauged line made in the material or by a former of suitable shape laid on the material as a guide to turn it over by."

"The first part of my invention consists in turning over the collar by a line pressed into the material by a die or by drawing a pointed instrument over it beside a pattern, and then following the indented line, or by turning it over the edge of the pattern or block of the proper curve or line."

"Another defect or difficulty in turn-over collars made of paper, or of paper and cloth combined, consists in the wrinkling or puckering of the inner part when brought into a circular form, as it is when on the neck of the wearer, and which is occasioned by the inner part of necessity occupying a smaller circle than the outer part."

"The second part of my invention consists in turning the collar over in a curved line, or in a series of straight lines and straight angles, by which means the wrinkling or puckering is entirely obviated. In a paper, or a cloth and paper combined, collar, if turned over on a straight line, in addition to the wrinkling and puckering, there is another objection, viz., the difficulty of inserting a necktie underneath the turned down portion and the band, and when inserted, it increases the tendency of the inside to wrinkle and pucker. But by turning over the collar on a curved line or on a series of straight lines that elongate the line by which it is turned over, there is a space formed between the turned down portion and the band portion in which the neck tie can be laid without the least tendency to wrinkle or pucker."

"The third part of my invention consists in so turning over a collar made of paper, or of paper and cloth combined, on a curved or arched line, as that a space shall be left between the

Page 90 U. S. 545

turned-over portion and the band portion, which space may be occupied by a necktie of any ordinary description."

"To enable others skilled in the art to make and use my invention, I will proceed to describe the same with reference to the drawings."

"My invention is not confined to any particular style of turn-over collars, but I regard it as more particularly applicable to collars made of paper or of paper and cloth combined."

image:a

"Hitherto collars have been turned over in a straight line, as represented by the dotted lines Y in Fig. 1, and the practical objection to all such collars has been mentioned above. The line X, however, as will be seen in said Fig. 1, is an arc of a circle, and on this line the part B is turned over on to the part A. The best mode of doing this is to make in the collar an impression of the curve or line on which it is to be turned over, either by means of a die pressed upon it or by drawing a pointed instrument over it beside or along a pattern. When this is done, the collar can be readily turned over on or following the indented line. Or the collar may be turned over the edge of a pattern or block of the proper curve or line. The line X, instead of being in a curve or arc of a circle, might be composed of a series of straight lines, with an angle at the center of the collar, and accomplish the desired object about as well."

"I prefer, however, to make the folding line on the arc of a circle. In turning the collar over on a curved line, as at X, instead of a straight line, as at Y, the corners b b of the turn over part B will be over the points X1 X1, instead of the points Y1 Y1, where a straight line would bring them; by which it is evident that the longer space, from Y1 to Y1 (i.e., from b to b), has only to cover the shorter space from X1 to X1 on the part A, forming the inner circle, and thus the inner circle will not be wrinkled or puckered by the tension of the outer one. Besides, by turning the collar on a curved line, so far from the outer portion crowding upon the inner portion and thus wrinkling it, the portion

Page 90 U. S. 546

B will actually stand off from the portion A, a distance corresponding somewhat to the space shown between the lines b Y1 and b X1, and varying only with the extent of curvature of said folding or turn-over line."

image:b

"This space between the two portions, A B, when the folding over is done, is available for a necktie, if one be worn, but the space itself prevents the two parts from pressing against each other, which pressing tends to wrinkle one or the other. d, e, and f, represent the buttonholes, which are punched in the material in the usual way."

"The drawings are about the size of a medium collar, and the greatest distance from the straight line Y to the curved line X is about one-fourth of an inch; it may, however, be more or less and still accomplish the object required. Collars thus constructed never wrinkle nor pucker, and may even be rolled up into a circle of not more than an inch or so in diameter (as is often convenient for transportation) without the slightest injury, as the difference in length of the outer and inner portions, and the fact that the outer portion stands off from the inner portion so as to leave clear space between them, admits of such rolling."

"Having thus fully described my invention, what I claim therein as new and desire to secure by letters patent is:"

"First. The turning over of a paper or a paper and cloth collar by a defined line, whether pressed into the material by a die or pointed instrument or by bending it over the edge of a pattern or block of the proper curve or line, substantially as described."

"I also claim turning the part B of a paper or a paper and cloth collar over onto or towards the part A in a curved or

Page 90 U. S. 547

angular line instead of a straight line, substantially as and for the purpose described."

"I also claim so turning over the part B onto or towards the part A in the manner above described, as that a space shall be left between the two parts, for the purpose and substantially in the manner herein described."

As to the first of these claims -- which covers a defined line, whether straight or curved, made by the means indicated, either pressing a die or pointed instrument into the material to make the line or making the line by bending the material over the edge of a pattern or block representing the desired line -- the testimony of several witnesses showed:

That anterior to the date of the patent, paper envelopes, the tops and bottoms of paper boxes, and similar articles requiring folds were shaped or folded by placing the material upon a lead or other soft platten, and making the impression of the required shape or fold, by bringing down upon it a steel "knife" and applying pressure, thus producing an indented or defined line, which the fold must follow.

That the same method was also employed in paper-folding machinery, and the folding and cutting of writing papers.

That the method so employed for marking the folds of envelopes was the same as that subsequently employed by an Italian named Karcheski to make the folds of paper collars.

That linen collars, cut with band and top all in one, without seam where the band joins the top, were folded by means of an indented line anterior to the patent.

That these collars were turned down or folded in the process of ironing: "ironed on blocks with a groove in the block, and the iron passing in this groove, the collar would receive the indenture to turn down on."

It was also proved that before the patent, paper collars and paper and cloth collars had been turned over by such defined line pressed into the material or by bending over the edge of a block or former. chanrobles.com-red

Page 90 U. S. 548

As to the second claim which covered the turning over of the collar in a curved or angular line, whether by a defined line or not, and by whatever means, it was proved, and indeed was not denied, that linen collars had, from a date long anterior to Gray's alleged invention, been turned over on a curved instead of a straight line, and that they had been so turned over "substantially for the purpose described" in the patent, viz., to avoid wrinkling or puckering, and to afford a space for the cravat.

It was shown that a common way of turning down linen collars on such curved line, and a way familiar to all who wear those collars, is to follow the line of the seam where the band joins the top. The band being commonly cut upon an arch or curve upon the upper side, the seam consequently makes a curved line, which is followed as a gauge in making the fold.

It is also proved by the witnesses that paper collars had, before Gray's application, been turned or folded upon a curve by methods the same as that described by Gray.

The third claim was considered by the witnesses the same as the second. and their testimony applied to it accordingly.

The court below found,

I. That Evans's reissue was void as not being for the same invention as the original. It also considered that Evans was not the inventor of the product patented by him.

II. That Gray's reissue was also void, his invention having been anticipated.

From a decree accordingly this appeal was taken. chanrobles.com-red

Page 90 U. S. 557



























chanrobles.com



ChanRobles Legal Resources:

ChanRobles On-Line Bar Review

ChanRobles Internet Bar Review : www.chanroblesbar.com

ChanRobles MCLE On-line

ChanRobles Lawnet Inc. - ChanRobles MCLE On-line : www.chanroblesmcleonline.com