US SUPREME COURT DECISIONS

1. A manufacture or a product of a process may be no novelty, and therefore unpatentable, while the process or agency by which it is produced may be both new and useful.

2. In cases of chemical inventions, when the manufacture claimed as novel is not a new composition of matter, but an extract obtained by the decomposition or disintegration of material substances, it is of no importance, in considering its patentability, to inquire from what it has been extracted.

3. When the substance of two articles produced by different processes is the same and their uses are the same, they cannot he considered different manufactures.

4. Paper pulp extracted from wood by chemical agencies alone is not a different manufacture from paper pulp obtained from vegetable substances by chemical and mechanical processes. chanrobles.com-red

Page 90 U. S. 567

5. The reissued patent No. 1448 granted to Ladd & Keen, April 7, 1863, for a pulp suitable for the manufacture of paper made from wood or other vegetable substances is void for want of novelty.

6. The patent granted to Watt & Burgess July 18, 1854, was for a process consisting of three stages for obtaining paper pulp from wood: the reissue No. 1449 to Ladd & Keen, dated April 7, 1863, is for a single stage process. It is not, therefore, for the same invention. Hence the reissue is void.

7. Construction of the two boiler patents granted to Morris L. Keen, the one dated September 13, 1859, and the other June 16, 1863. Both held to be for combinations.

8. A construction of the patent granted May 26th, 1857, to Marie Amedee Charles Mellier.

a. The patent covers the process claimed, when applied to wood as well as when applied to straw.

b. The "internal pressure," as described in the specification, is to be ascertained by deducting from the pressure marked by the steam gauge, the weight of one atmosphere.

The preceding case has treated somewhat of the manufacture of paper, though the case had reference chiefly to a manufacture from rags, and by mechanical means. The present case concerns the manufacture of paper, though this case relates more to manufacture from wood &c., and by chemical agencies.

As most persons know, the materials out of which paper is made have to be reduced in the paper mill, before the paper is formed, into what is known as pulp. This pulp, whether obtained from wood or other vegetable substances, is a fibrous material consisting of what is called in chemistry "cellulose." As such, in its natural state, it is combined with other substances called "intercellular matter," which must be removed to render the cellulose fit for being made into paper. It was well known before the year 1853 that the fibers of cotton or of flax were pure cellulose, and that cellulose existed also in straw and wood, but it had not, so far as is known, been extracted from wood by chemical agencies alone, nor brought into a condition to be wrought into paper without mechanical treatment. Even the fibers chanrobles.com-red

Page 90 U. S. 568

of cotton and of flax, though pure cellulose, required disintegration in order to reduce them to a pulp suited to felt in paper. This was usually effected by mechanical means -- by a rag-beating machine -- but when thus effected, a product had been obtained adapted to the manufacture of paper, a fibrous pulp, the same in kind and capable of the same use as that obtained from straw or wood.

So a pulp had been produced from straw and some varieties of wood by various processes, many of them cumbrous and all of them perhaps much inferior to the process of Watt & Burgess -- two persons a patent to whom and certain reissues of it were under consideration in this case. This is shown by numerous well known patents, and was admitted in this case.

So before the year 1853, the cellulose produced from straw, wood, and other vegetable substances was not produced in the first instance in a condition of purity other than one approximate. But it was cellulose abundantly suitable for making paper, and could be purified.

So again, prior to the year mentioned and the patent of Watt & Burgess, the cellulose produced was not in the first instance of the proper consistency and dimensions and with fiber of the proper length for immediate felting. However, by chemical and mechanical treatment subsequently applied it could be made so and made so completely.

Finally. In no case and by no process prior to 1853 was pulp produced ready for washing and bleaching by a single operation. Successive operations, largely mechanical, were used, the vegetable substances being however sometimes boiled in alkalies, with or without pressure, and disintegration by mechanical means following.

This having been the previous state of the art, the American Wood-Paper Company being engaged, A.D. 1866, in the manufacture of paper pulp and paper from wood, straw, and other vegetable substances under different patents owned by them, including two reissued patents of Watt & Burgess, all of which different patents they alleged could be used conjointly in their business, filed a bill in the court below to chanrobles.com-red

Page 90 U. S. 569

restrain a company called the Fiber Disintegrating Company from what was alleged to be a infringement.

The defendant company made their paper principally from bamboo, though it was alleged and there was some evidence to show that they made it also from straw.

The following were the patents owned by the complainants:

I. Two reissued patents, numbered respectively 1448 and 1449, upon a patent originally granted on the 18th day of July, 1854, and antedated the 19th day of August, 1853 (the date of a patent which had been granted by the British government), to Charles Watt and Hugh Burgess, already named, for an improvement in the manufacture of paper from wood, reissued (to Ladd & Keen) in the two reissued patents numbered as above, on the 7th day of April, 1863 -- one for an improved manufacture of paper and paper pulp from wood and the other for the paper and paper pulp, the product of said process of manufacture.

II. A patent granted to Morris L. Keen on the 13th day of September, 1859, for a new and useful improvement in boilers for making paper pulp from wood.

A patent granted on the 16th day of June, 1863, to the said Keen, for an improvement in boilers for making paper pulp.

III. A patent granted on the 26th day of May, 1857, antedated the 7th day of August, 1854, to Marie Amedee Charles Mellier (a Frenchman), for an improvement in the manufacture of paper.

The defendant set up, among other things,

1. Invalidity of the Watt & Burgess reissues on the ground, as to No. 1448, that the invention claimed was old, and as to No. 1449 on the same ground of want of novelty and on the additional ground, one more specially insisted on, that the reissue was for a different invention from that patented; and, therefore, by the terms of the Patent Act, [Footnote 2] which required that the reissue should be for the "same invention" chanrobles.com-red

Page 90 U. S. 570

as the original patent, void. The alleged want of identity consisted in the fact, as alleged, that the original patent described the production of paper pulp in a state ready for washing and bleaching, by three successive stages of work, while the reissue described the production of it by a single operation.

2. That the Keen patents were for combinations, and that all parts had not been used. Accordingly that there was no infringement.

3. Invalidity of the Mellier patent on the ground of want of novelty in the alleged invention.

Evidence was taken upon all the issues thus raised, and a decree was made.

That the Watt & Burgess patents were void.

That the Keen patents were for combinations, and that defendants were not infringers.

That the Mellier patent was valid, and that the defendants were infringers of it.

Thereupon the complainants appealed from that part of the decree which related to the Watt & Burgess and the Keen patents and the defendants from that part which sustained the bill as to the Mellier patent.

To enable the reader to understand perfectly the case, the patents under consideration are all set out. This, with a few remarks and some testimony &c. interposed, it is hoped will enable the reader who has any general knowledge of the art of papermaking, sufficiently to understand the case.

"

I

"1. ORIGINAL PATENT JULY 16, 1854. ANTEDATED AUGUST 19, 1953."

"Specification"

"The wood or vegetable substances upon which it is intended to operate by this process should first be reduced to very fine shavings or cuttings, the finer the better. This may be done in any suitable machine."

"The shavings are then to be boiled in a solution of caustic alkali, the strength of which, being dependent on the nature of vegetable substances operated on, can only be learned by experience.

Page 90 U. S. 571

For deal or fir wood, we find that a solution of alkali of the strength indicated by twelve degrees of the English hydrometer answers very well. The length of time necessary for this part of the process is somewhat dependent on the nature of the vegetable substance to be treated."

"We find boiling in a solution of caustic alkali under pressure of considerable service."

"We do not claim this operation as a part of our invention."

"The shavings are then to be well washed and pressed, and the washings may be saved and evaporated down and burned in a suitable furnace, when they are again available for the same purpose."

"The damp shavings are now to be exposed to the action of chlorine, or the compounds of chlorine with oxygen, till on a portion being placed in a dilute solution of caustic alkali the vegetable substance falls into a dark pulpy mass. This part of the process is conveniently effected by placing the damp shavings on racks or drawers about nine inches apart, one above another, arranged in a chamber, and allowing the chlorine or the compounds of chlorine with oxygen to enter the chamber and fill it. Of the compounds of chlorine with oxygen, we prefer that known as prot-oxide of chlorine, or hypochlorous, or chlorous acid, or euchlorine. If found more convenient, the chlorine, or the compounds of chlorine with oxygen, may be used in aqueous solution instead of the gaseous form."

"As soon as the shavings have been sufficiently acted upon by the gas, as may be ascertained by the method above described, they may be removed and the hydrochloric acid, which is the result of the above process, removed by washing, and the shavings well pressed. This should be done with as little water as possible, as this acid may be saved and made use of for the reproduction of chlorine. The shavings are now to be placed in a weak solution of caustic alkali, when they will fall into a pulpy mass of dark brown color. This part of the process may be expedited by exposing this mass to the action of a beater or 'engine,' placed in a tank containing the solution of alkali."

"The pulp thus obtained, as above described, having been freed from the alkali by washing (which may be saved as before directed), may now be bleached by the usual process or, as we prefer, by chlorite or hypochlorite of soda or potash, liberating the chlorous or hypochlorous acid by hydrochloric acid. "

Page 90 U. S. 572

Having thus fully described the nature of our invention and shown how the same may be reduced to practice, we wish it to be distinctly understood that we do not confine our claim to the apparatus or utensils or the manipulations herein named, as they may be varied to suit the circumstances of the case.

"Claim"

"But what we do claim as of our invention and desire to secure by letters patent is the pulping and disintegrating of shavings of wood and other similar vegetable matter for making paper by treating them with caustic alkali, chlorine simple, or its compounds with oxygen and alkali, in the order substantially as described."

As has been already stated (supra, p. 90 U. S. 569), one ground set up by the defendants as a defense to the bill was that the original patent and the reissue No. 1449 were not for the same invention, the allegation of the defendants being that the original patent was for the production of the pulp ready for bleaching and washing by a single operation, whereas in the reissue No. 1449, three distinct operations, following each other in order of time, were adopted.

In support of this their view the defendants showed that in March, 1854, before the original patent was granted but while an application for it was pending, the Commissioner of Patents wrote to Watt & Burgess stating that there were "at least forty other applications for patents, or patents on record, for processes of treating vegetable fiber," and that "in a large part of these, alkali and chlorine or its compounds were used," and requesting Watt & Burgess to make

"a clear and definite expression of what the novelty in their devices was confined to, both in the specifying of the nature of the invention and in setting forth the claim."

The defendants showed further that, in reply, Watt & Burgess, through their counsel, said:

"The invention relates to a series or combination of processes, in the order in which they are stated, for treating shavings &c., for the purpose of reducing hem from their crude state to a pulp, ready to be made into paper. The several processes through

Page 90 U. S. 573

which the shavings pass, may be enumerated in the following order, viz.:"

"First. The shavings are boiled in a solution of caustic alkali until by the test of washing they have lost their woody taste (for white pine shavings about three hours), when they are washed and pressed to rid them of the alkali."

"Second. They are then subjected to the action of chlorine or its compounds and oxygen until, by testing a portion in a dilute solution of caustic alkali, it falls into a dark pulpy mass, when it is again washed and pressed to remove the hydrochloric acid, which is the result of this process."

"Third. The material is then subjected to a weak solution of caustic alkali, when it falls into a pulpy mass of a dark-brown color. It is then again washed to free it of the alkali, and may be bleached by any of the known processes."

"The shavings must pass through these several processes, and in the order stated, and this constitutes the invention. The processes, taken separately, will not produce the article, but their sum will, and they are only claimed in their series, and not in their individual capacities. It is admitted that alkali and chlorine have been used in pulping vegetable matter. But it is not known that alkali, chlorine, oxygen, and alkali, have been used in the manner, and in the order, in which Messrs. Watt & Burgess use them. This order and series of processes is what, therefore, constitutes their invention, and what they suppose they have embodied in their claim."

After some further discussion, the patent from which the above specification is quoted was granted.

The testimony of Burgess, one of the original patentees, was taken by the complainants. He said:

"I began to make experiments on the preparation of pulp for making paper from wood in 1851, with Mr. Watt. On account of his great age, making most of the experiments devolved on me. . . . I produced a good pulp by boiling wood in caustic alkali at a high pressure. I found that some woods required much more alkali than others. I found that when intercellular matter was not wholly removed by caustic alkali, it could be decomposed by chlorine, or the hypochlorides, one answering the purpose as well as the other. I used, therefore, chlorine or bleach power, preferably chlorine, since one of the products

Page 90 U. S. 574

attending the elimination of chlorine -- namely sulphate of soda -- had a marketable value in England. I found that to a certain extent and when desirable, I could substitute the employment of caustic alkali for chlorine, the one for the other, but the nature of the wood under treatment materially affected this substitution. I found the greater quantity of intercellular tissue was removed by the caustic alkali, the less chlorine or its compounds with oxygen was required, and consequently the higher the temperature and pressure and the greater the strength of the alkali employed the less of the intercellular tissue was left, and consequently less chlorine or its compounds with oxygen required; but if sufficient caustic alkali was employed at a requisite temperature, chlorine was only necessary for bleaching purposes. As regards the cost, the chlorine process appeared to cost less than the free use of alkali, since one of the products of its elimination is a marketable article in England, and we calculated on the sale of the sulphate of soda as one of the sources of profit in working the patent. In drawing up the specification for a patent, I therefore laid most stress on the process that seemed to offer the greatest pecuniary advantage, since the recovery of the soda ash had not been practically tried by us at this time, and we were in uncertainty as to the success of such recovery. With a knowledge of the above facts, I was desirous of embracing in my specification the modes of producing wood pulps with caustic alkali either with or without steam pressure, supplementing when necessary the alkaline boiling with the subsequent treatment of chlorine or the hypochlorides."

"I prepared a description of my invention -- a provisional specification -- prior to my application for an English patent. I here annex a copy of the specifications, both provisional and final, of the English patent."

"The wood upon which it is intended to operate by this process should first be reduced to very fine shavings, the finer the better; this may be done by any suitable machine."

"The shavings should then be boiled in caustic alkali of the strength indicated by about 12� of the English hydrometer. This process is much better performed under pressure, after the wood has been boiled for about twenty-four hours, but we do not confine ourselves to this time, as it varies with the nature of the wood and amount of pressure and it should be well washed and squeezed to remove all the alkali. "

Page 90 U. S. 575

"It is then placed in a chamber furnished with racks about nine inches apart, upon which the wood is placed and exposed to the action of chlorine or any of the compounds of chlorine with oxygen, however obtained. The wood should be exposed to the action of chlorine or its compounds with oxygen until it assumes an orange color and falls into a pulpy mass on the addition of caustic alkali."

"[Here followed a plan, stated to be a convenient and economical means of obtaining chlorine.]"

"When the wood has been sufficiently acted upon by chlorine or its compounds with oxygen, it is to be removed from the gasing chamber and the HCl with which it is saturated, which is formed by the action of the chlorine, is to be removed with water and the wood pressed so as to remove as much of the water and acid as possible. After all the acid has been removed from the wood, it is to be placed in a suitable vessel and a weak solution of caustic alkali poured upon it so as to cover it, when the wood falls into a pulpy mass of a dark-brown or almost black color. . . . The pulp, after being well washed, has now to be bleached. This may be done in the usual way, or we prefer to add a certain quantity of chlorite of soda, called also hypochlorite, and liberating the hypochlorous acid by dry HCl. The quantity of chlorite of soda can only be learned by experience."

We now pass to:

"2. REISSUE (1448) PRODUCT PATENT, APRIL 7, 1863."

"The most important feature of this patent to be noted is its claim; the matter of identity between the original and reissue, not being a matter which need, in this No. 1448, specially engage the reader's attention, that matter occurring as one to be attended to chiefly in considering the original and the reissue No. 1449."

"Be it known that Charles Watt and Hugh Burgess did invent a new and useful improvement in the manufacture of paper pulp from wood and other vegetable substance."

"Specification"

"The wood or vegetable substance, from which it is intended

Page 90 U. S. 576

to make the pulp, should be first reduced to fine shavings or cuttings. This may be done in any suitable machine."

"The shavings or cuttings of wood or the vegetable substances are then to be boiled in a solution of caustic alkali in a suitable boiler under pressure. The strength of the alkali is dependent on the nature of the vegetable substance used and operated upon. For non-resinous woods, a solution of alkali of the strength indicated by 17� of the English hydrometer or thereabouts answers very well, and for deal, pine, or fir wood or other woods containing resinous matter, a strength of about 12� is sufficient, but varying with the nature of the vegetable substance being acted upon to a strength of about 10�. The varied nature of the vegetable substance to be operated upon is such that only general directions can be given for the strength of the alkali or the degree of heat to be used or the duration of the operation. Boiling in a solution of caustic alkali under pressure is of essential importance."

"By the words 'under pressure' is meant a pressure at, near, or above 300� of Fahrenheit's scale, which is the ordinary pressure used, but a heat and corresponding pressure of from 300� to 500� may be used, according to the nature of the vegetable substance to be treated, whether resinous or non-resinous or otherwise, and the time may be from four to twelve hours, according to the nature of the substance."

"After the vegetable substance has been thus operated upon by caustic alkali under heat and pressure for the requisite time, as above described, it should be discharged from the boiler while under pressure into a tank or other reservoir with proper safety valves and pipes for the discharge of the steam, and should be drawn as soon as the steam shall have escaped into open vats where it can be operated upon in the next stage of the process, or it may be drawn directly into the vats from the boiler."

"The vats which receive the wood shavings or cuttings or other vegetable substances being formed into pulp should be constructed with suitable means of drainage. The alkaline solutions must then be removed from the pulp, either by percolation and subsequent washing in the vats or by pressure in any convenient apparatus and subsequent washing. The mode of percolation has generally been found sufficient. . . . The alkaline solutions having been removed by percolation and washing

Page 90 U. S. 577

or by pressure and washing, the wet mass of woody or vegetable pulp is now to be exposed to the action of chlorine, or the compounds of chlorine with oxygen, for the purpose of bleaching it and preparing it for the manufacture of white paper. Brown, colored, or unbleached paper of a good quality can be produced from the pulp as soon as the alkaline solutions are removed, but for the production of good white paper it is necessary to subject the pulp to the bleaching process. If the material used be wood or vegetable substance of a non-resinous nature, the pulp may be bleached by subjecting it to the action of chlorine in a gaseous form or, which is preferable in this case, in an aqueous solution in any of the common and well known modes."

If the wood or vegetable substance be of a resinous nature, the alkaline solutions should be removed by the mode above described, and the pulpy mass should be exposed to the action of chlorine or its compounds with oxygen. This may be done by placing the pulpy mass of woody or vegetable substance on racks or drawers arranged in a chamber and applying chlorine or its compounds with oxygen in the gaseous form, which with resinous substances is preferable to the aqueous solution, until the mass is sufficiently acted upon. The mass must then be again well washed and treated with a weak solution of caustic alkali, warm preferred, which changes the red color to a dark brown. The alkaline solution should then be removed by washing, and the resulting gray pulp may be bleached by any ordinary method of bleaching.

"Claim"

"What we claim &c., as the invention of Charles Watt and Hugh Burgess as a new article of manufacture is a pulp suitable for the manufacture of paper, made from wood or other vegetable substances by boiling the wood or other vegetable substance in an alkali under pressure, substantially as described."

We come, finally, in the Watt & Burgess patents, to

"3. REISSUE (1449) PROCESS PATENT, APRIL 7, 1863."

In reading this reissue, the reader will direct his attention to the matter of how far it is for the same invention as the original patent -- that is to say, having in his mind how far that chanrobles.com-red

Page 90 U. S. 578

was for producing by a succession of operations -- three operations perhaps -- pulp in a state fit for washing and bleaching; he must now direct his attention to the matter whether this reissue is for producing it by such a series or by a single operation; whether, in short, the reissue is for the "same invention" as the original patent.

"Be it known that Charles Watt and Hugh Burgess &c., did invent, make, and apply to use, certain improvements in pulping and disintegrating wood and other vegetable substances &c."

"Specification"

"The wood or vegetable substances upon which it is intended to operate by this process should first be reduced to shavings or cuttings. This may be done in any suitable machine."

"The shavings or cuttings of wood or the vegetable substances are then to be boiled in a solution of caustic alkali in a suitable boiler under pressure. The strength of the alkali is dependent upon the nature of the vegetable substance used and operated upon. For non-resinous woods, a solution of alkali of the strength indicated by 17� of the English hydrometer or thereabouts answers very well, and for deal, pine, or fir wood, or other woods containing resinous matter, a strength of about 12� is sufficient, but varying with the nature of the vegetable substance being acted upon to a strength of about 10�. The varied nature of the vegetable substance to be acted upon is such that only general directions can be given for the strength of the alkali or the degree of heat to be used or the duration of the operation. Boiling in a solution of caustic alkali under pressure is of essential importance. By the words 'under pressure' is meant a pressure at, near or above 300� of Fahrenheit's scale, which is the ordinary pressure used, but a heat and corresponding pressure of from 300� to 500� may be used according to the nature of the vegetable substance to be treated -- whether resinous or non-resinous or otherwise -- and the time may be from four to twelve hours, according to the nature of the substance."

"After the vegetable substance has been thus operated upon by caustic alkali under heat and pressure for the requisite time as above described, it should be discharged from the boiler, while under pressure, into a tank or other reservoir, with proper safety

Page 90 U. S. 579

valves and pipes for the discharge of the steam, and should be drawn, as soon as the steam shall have escaped, into open vats where it can be operated upon in the next stage of the process, or it may be drawn directly into the vats from the boiler. The vats which receive the wood shavings or cuttings or other vegetable substances being formed into pulp should be constructed with suitable means of drainage."

"The alkaline solutions must then be removed from the pulp either by percolation and subsequent washing in the vats or by pressure in any convenient apparatus and subsequent washing. The mode of percolation has generally been found sufficient. The alkaline solutions thus obtained may be saved and evaporated down, and the residuum burned in a furnace suitably constructed, so as to prepare the alkaline substances for use in a repetition of the same process."

"The alkaline solution having been removed by percolation and washing or by pressure and washing, the wet mass of vegetable or woody pulp is now to be exposed to the action of chlorine or the compounds of chlorine with oxygen for the purpose of bleaching it and preparing it for the manufacture of white paper. Brown, colored, or unbleached paper of a good quality can be produced from the pulp as soon as the alkaline solutions are removed, but for the production of good white paper, it is necessary to subject the pulp to the bleaching process."

"If the material used by wood or vegetable substance of a non-resinous nature, the pulp may be bleached by subjecting it to the action of chlorine in a gaseous form, or, which is preferable in this case, in an aqueous solution, in any of the common and well known modes."

"If the wood or vegetable substance be of a resinous nature, the alkaline solution should be removed by the mode above described, and the pulpy mass should be exposed to the action of chlorine or its compounds with oxygen. This may be done by placing the pulpy mass of woody or vegetable substance on racks or drawers arranged in a chamber, and applying chlorine, or its compounds with oxygen in the gaseous form, which with resinous substances is preferable to the aqueous solution, until the mass is sufficiently acted upon. The mass must then be again well washed and treated with a weak solution of caustic alkali, warm preferred, which changes the red color to a dark brown. The alkaline solution should then be removed by washing, and

Page 90 U. S. 580

the resulting gray pulp may be bleached by any ordinary method of bleaching."

"Claim."

"What we claim as the invention of Charles Watt and Hugh Burgess is, first:"

"The process of treating wood or other vegetable substance, by boiling it in alkali under pressure, as a process, or preparatory process, for making pulp for the manufacture of paper from such woods or other vegetable substances substantially as described."

"We also claim the process of treating resinous woods by boiling in an alkali under pressure and treating the product with chlorine and its compounds with oxygen for making white pulp for the manufacture of paper from such woods, substantially as described."

So far as to the Watt and Burgess patents and their reissues. We now proceed to:

"

II

The first of these purported to be an invention of certain "improvements in boilers for boiling wood or ligneous materials for making paper pulp, under pressure." The following was the

"Specification"

"Fig. 1, on page 90 U. S. 581, represents a perspective view of said boiler."

"Fig. 2, on page 90 U. S. 582, represents a vertical central section through the same."

"My invention relates to the construction of a boiler for boiling wood and ligneous materials for making paper pulp, in which proper provision is made for keeping the stock covered by the alkali or liquid used, and giving it motion, to insure the mass being properly boiled throughout, and a discharge valve or cock, by means of which the stock when sufficiently boiled is blown out in a pulpy state."

"To enable others skilled in the art to make and use my invention, I will proceed to describe its construction and operation. "

Page 90 U. S. 581

"A represents a vertical cylindrical boiler, which is mounted on supports, B, or on any other suitable frame. The upper part of the boiler is made conical, and is provided with an expansion"

image:a

"chamber, C, through the aperture of which the boiler is charged, and which is closed by a cover, D, which is bolted steam-tight

Page 90 U. S. 582

to the same. The bottom of the boiler A, is made funnel-shaped, and ends in the center in the discharge pipe, E, which is closed by a piston or stop cock, G. The latter is secured to the rod H, and can be opened or closed by means of the hand wheel F, of the rod H, which passes through the stuffing box I, and has"

image:b

"its lower bearing on the bracket a. K represents two stirrers, the shafts of which run at their lower ends in the steps b, while their upper ends pass through the stuffing boxes L, and are provided with pinions M, which are driven by suitable gearing.

Page 90 U. S. 583

The shafts of the stirrers, K, are provided on one side only with the horizontal stirring arms, which, when the boiler is to be charged are turned towards the periphery of the boiler, and are therefore not in the way of the material as it is thrown into the boiler. d represents a perforated plate, which is secured to the rod, N, and which rests on the brackets, g, of the expansion chamber, C. It is intended to press the material down and to keep it submerged in the fluid in which it is to be boiled. The plate, d, is prevented from rising by the upper end of the rod, N, being in contact with the lower face of the cover, D. O represents try cocks, by which the material in the boiler can be tried, to what degree of perfection the stock is worked."

"The operation is as follows:"

"The boiler being charged with the proper solution of caustic alkali or other suitable fluid, and with the material which is to be reduced to pulp, the plate d is placed upon it, and the cover G is screwed down tightly. The boiler A is then heated, either by a direct fire or by any other heating apparatus, and the mass in the boiler is boiled and stirred until thoroughly disintegrated. During this process, the steam arising from the fluid rises through the perforated plate, d, and fills the expansion chamber, C, whence it exerts a pressure upon the boiling mass in the boiler."

"When the stock has been reduced to the desired perfection, the stop cock, G, is opened by means of the hand wheel, E, and the entire mass is blown by the pressure of the steam in the expansion chamber and boiler through the pipe, E, as a pulp, into an open tank adjacent to the boiler, A. The expansion chamber, C, may be provided with a pipe leading to a steam gauge, to indicate the pressure of steam in the boiler."

"Claim"

"Having thus described my invention, what I claim is a boiler for boiling, under pressure, wood and ligneous materials for making paper pulp, constructed with an expansion chamber, stirrers, and discharge valve or cock, arranged for the purposes and in the manner substantially as herein stated."

In regard to this patent, the main question seemed really to be whether or not it was for a combination. The proofs showed that the defendants had never employed two stirrers, nor even one having arms upon one side alone, capable of chanrobles.com-red

Page 90 U. S. 584

being turned outwardly when the boiler was filled, so as not to impede the filling or emptying of it. They used for some time a single shaft provided with four blades, shaped like those of a propeller; used, in other words, an ordinary stirrer; but this they abandoned, they having found that from its being under the expansion chamber and under the aperture for supply, it impeded the filling and emptying of the boiler. This abandonment was about the time when the bill in this case was filed. Messrs. Renwick and other experts of the defendants testified that in their opinion the contrivance of the defendants did not infringe this patent of Keen. Dr. Rand, an expert in chemistry but not in mechanics, who was called for another part of the case, but was examined in this, gave it as his opinion that it did.

2. The SECOND of Keen's patents purported to be for "improvements in boilers for making paper pulp," and contained the following

"Specification [Footnote 3]"

"In boilers, where a perforated diaphragm is placed in the interior, and through which diaphragm the material out of which the pulp is to be made is to be charged into the cylinder, it is found that the material falling upon the diaphragm chokes up its openings, and moreover gets above or on top of the liquid, which it is the special object of the diaphragm to prevent. My object and purpose is to prevent this difficulty, and I have achieved it in a very simple manner. My invention consists in connecting the man-or feed-hole in the shell of the boiler with the man- or feed-hole through the diaphragm, by a perforated well or cylinder, so that the material can be charged through said well into the boiler without falling upon or clogging the perforated diaphragm."

"To enable others skilled in the art to make and use my invention, I will proceed to describe the same by reference to the drawings."

"A represents a boiler, which stands vertically in the furnace or brickwork, and which, for strength and convenience, has

Page 90 U. S. 585

hemispherical ends, its body being cylindrical. This boiler is suspended to the brickwork or foundation, by flanges, e, so that"

image:c

chanrobles.com-red

Page 90 U. S. 586

"it may expand or contract without loosening itself from the foundation or its support."

"In the interior of the boiler near its upper end, there is placed a perforated diaphragm, B, through the center of which there is an opening, c c, and at the top or crown of the boiler there is also a man- or feed-hole, or opening, a a, and these two openings, a c, are connected by a perforated well or cylinder, G, to act as a guide for the material being charged into the boiler, and to prevent it from falling upon the perforated diaphragm, and thus not only choking its openings but getting on top of the liquid, which it is important to avoid as damaging to the pulp."

"The openings, a c, are respectively closed after the boiler is charged, by the covers, b d, which may be secured in any of the known ways of securing man-hole covers in steam boilers. Above the perforated diaphragm, B, there is an expansion chamber, I, into which the liquid contents of the boiler expand when the fire is applied to the boiler, whilst the perforated diaphragm, B, keeps the crude material always submerged."

"E is a discharge pipe at the bottom of the boiler, A, and F a stop or discharge valve for blowing out the contents of the boiler whilst under pressure when said contents have been sufficiently boiled."

"C is a steam indicator, and D a safety valve, of any of the common constructions, and instead of their being placed at the top of the boiler, they may be brought down to any convenient position or locality, near the attendant, so as to be readily observed by him."

"The boiler may be heated by the direct application of fire, or by any other convenient or known mode; but I prefer to use a direct application of heat, and for this purposes use a fire car or truck, H, on wheels, which is withdrawn when the boiler is to be discharged, and replaced immediately after the boiler is again refilled for service."

"Claim"

"Having thus fully described the nature, object, and purpose of my invention, what I claim therein as new, and desire to secure by letters patent is first, a boiler provided with a perforated diaphragm and well, or their substantial equivalents, arranged in the manner and for the purpose described. "

Page 90 U. S. 587

"I also claim, in combination with the boiler, the arrangement of the discharge pipe and valve for the purpose of blowing out or discharging the contents of the boiler under pressure, substantially as and for the purpose set forth."

In regard to this patent, too, the main question seemed really to be whether it was for a combination.

The proofs showed that the defendants did not use a perforated well connecting the feed-hole in the shell of the boiler with a man-hole in its shell, but fed their boiler by means of a feed-hole below the diaphragm, not through it.

III

This patent purported to be for an improvement in the manufacture of paper.

"Specification"

"The invention has for its object a peculiar process for the treating of straw and other vegetable fibrous materials requiring like treatment preparatory to the use of such fibers in the manufacture of paper, and the improvement consists in subjecting straw or such other fibrous materials to a pressure of at least seventy pounds on the square inch when boiling such fibrous matters in a solution of caustic alkali. For this purpose, the straw or fibrous matters are cut into short lengths, soaked in warm water, and washed. They are then placed in a suitable boiler, and I use for such purpose a rotary boiler, provided with a coil or coils of steam pipe for the purpose of heating the contents, and I prefer that the boiling should be carried on at a temperature to produce at or above eighty pounds on the square inch in the boiler where are the fibrous materials to be acted upon. But so high a temperature is not absolutely necessary, for I have found by experiment that it is essential that a temperature equivalent to seventy pounds on the square inch must be employed. The quantity of alkali used is at the rate of about sixteen percent of caustic soda or potash of the straw or fibrous substance under process. The fibers may then be bleached by the use of a comparatively small quantity of bleaching powder or chloride of lime."

"To enable others skilled in the art to make and use my invention, I will proceed to describe more fully the manner of using

Page 90 U. S. 588

the same. The straw or other fibrous material requiring a like process to prepare the same for the paper manufacture is first, as heretofore, to be cut in a chaff-cutting or other machine into short lengths, and to be freed from knots, dirt, and dust, and then steeped for a few hours in hot water. The straw or fibrous materials and a weak solution of caustic alkali are then to be placed in a suitable close boiler, heated by steam, as hereafter explained, and the heat is to be raised to such a degree as to attain and maintain for a time a pressure internally of the boiler equal to or exceeding seventy pounds on the square inch, that is, about 310� of Fahrenheit, by which means a considerable saving of alkali as well as time and fuel results as compared with the means of using a hot solution of caustic alkali, as now practiced in preparing straw and other fibers for papermakers. The boiler employed for the purpose and the manner of heating it by steam may be varied. But first it must have a rotary motion, either on its long or on its small axis, by means which are very well known, and secondly, I prefer not to send the steam directly into the liquid in which the materials are immersed, but to pass it either in a jacket around the boiler or through a coil or a system of steam pipes inside of it so that the steam does not mix with the caustic alkaline solution in the middle portion of the boiler, but is kept separate and does not therefore, in condensing, dilute the caustic alkaline solution used."

The plan of construction of the boiler I would recommend would be, if the boiler is to rotate vertically or on its small axis, as very well known, to cover it with a jacket so that the steam could circulate from one end to the other between the two plates, or rather, if it is to revolve horizontally or upon its long axis, as is equally very well known, to fix near each end of the boiler and inside of it a diaphragm or partition, which partitions are connected together by numerous tubes which are arranged in a circle near the outer circumference of each partition. By this arrangement the steam is introduced through the hollow axis at one end of the boiler, and it passes through the steam pipes and thence into the compartment at the other end of the boiler, where it and the condensed steam are conveyed away, as is understood, through the other hollow axis. In adopting the plan of not sending directly the steam into the boiler, I found the three following advantages: 1st, not to dilute, as I have already said, the alkaline solution; 2d, to avoid the chanrobles.com-red

Page 90 U. S. 589

trouble of having sometimes the end of the steam pipe in the boiler choked with straw, and to prevent, in case that, by one cause or another, the pressure in the steam boiler would fall under the degree of the pressure in the straw boiler, the priming of the first by the second, viz., the absorption of straw and alkaline solution from the straw boiler into the steam boiler; 3d, the greater facility of cooling the straw boiler when the pressure has been maintained for a sufficient length of time, by means of turning off the steam at one end, letting it at the other end out of the jacket, or of the coils or steam pipes just described, and passing through the same a stream of cold water, which at the same time that it cools the mass furnishes a quantity of cold water, which can be received in convenient vessels, and will be found very useful for washing the straw or other fibrous materials after boiling.

By means of submitting the straw or similar fibrous materials to a pressure of between seventy to eighty-four pounds on the square inch inside of the boiler, I can reduce considerably the proportion of alkali; and the solution which I prefer to use is to be from two to three degrees of Baume, or of a specific gravity of from 1.013 to 1.020, and at the rate of about seventy gallons of such solution to each cwt. of straw or other fibrous vegetable matters requiring like treatment.

The boiler is to be filled with straw and alkaline solution and then closed fluid and steam tight. The boiler is made to revolve slowly, say about one or two revolutions per minute, and the steam is to be admitted. I find it desirable to keep up the heat and pressure during about three hours after the pressure above mentioned has been obtained, when the process of boiling is complete. A steam gauge properly fixed upon the boiler will enable one to ascertain when the pressure has attained the required degree. When the apparatus and the fibers under process have been cooled by means hereinbefore mentioned, or rather when the pressure has been reduced to nothing, I open the manhole of the boiler, empty the materials in suitable vessels, and wash them first with hot water, then with cold water, until the liquor runs perfectly clear. I then steep the fiber for about an hour in hot water, acidulated with a quantity of sulphuric acid equal to about two percent of the weight of the fibers under process, and finally the washing is completed with cold water. The straw or fiber may then be bleached in the chanrobles.com-red

Page 90 U. S. 590

ordinary manner, and it will be found to be accomplished by a comparatively small quantity of chloride of lime.

"Claims"

I do not claim the general use of caustic alkaline solutions, nor the employment generally of a close boiler for boiling straw or other vegetable fibrous substances.

But what I claim as my invention and desire to secure by letters patent is the use of a solution of caustic soda (NaO) in a compartment of a rotary vessel, separate from that which contains the steam heat, substantially as described.

I also claim the within-described process for bleaching straw, consisting in boiling it in a solution of pure caustic soda (NaO) from 2� to 3� Baume, at a temperature not less than 310� Fahrenheit, after it has been soaked and cleaned, and before submitting it to the action of a solution of chloride of lime from 1� to 1 1/2�, substantially as described.

It was the second of these claims that the defendants were charged with infringing.

On the whole case, therefore, to recapitulate and explain, the alleged infringement of the Mellier patent and of the reissue No. 1449, consisted in the use by the defendants of bamboo, disintegrated by a peculiar process, in the manufacture of paper pulp, by boiling it in a caustic alkaline solution under a pressure not exceeding sixty pounds, and at a temperature corresponding thereto, and as to the reissue No. 1448, in the use of the pulp so produced.

The apparatus whose use by the defendants was alleged to infringe the Keen boiler patents of 1859 and 1863, was a boiler for the same purposes as those claimed in those patents, and exhibiting the same combination of parts as the patent of 1859, except the peculiar stirrers, and the same combination as the patent of 1863, except the diaphragm; nor were any equivalent devices used in the place of these elements.

One great difficulty in regard to the patent to Mellier was, saying what invention it was that was patented, and different courts had given to the patent different constructions. chanrobles.com-red

Page 90 U. S. 591

In the court below, the invention covered by this patent was construed to be a process for the production of pulp from wood &c. by a simple chemical operation, and upon this singleness of the operation and the consequent economy of time and material the novelty and utility of the invention were sustained. The description of his process by the patentee was so construed by the court, upon reference to the French system of reckoning pressure, as to fix the minimum temperature specified at a point below that which the defendants had reached in their use of the process. The claim was declared to include vegetable substances besides those similar to straw, and of such a class as to comprise bamboo, and the preparatory process used by defendants for the disintegration of the material, it was held, did not affect their liability for the use of a final process which was substantially the same as that claimed in the Mellier patent.

In the Circuit Court of Pennsylvania, Mr. Justice Cadwalader expressed his idea of Mellier's invention thus:

"Mellier would appear to have been the first person who discovered that the temperature and strength of the solution and the duration of the boiling could in practice be so graduated and adjusted as to produce the pulp at one operation."

But in Buchanan v. Howland, [Footnote 4] when the same patent was presented for construction, the Circuit Court for the Northern District of New York (Hall, J.) thus stated the principle of the discovery:

"The real discovery of Mellier -- the main idea, the spirit or principle of his invention -- was that the known effects of a solution of pure caustic soda, which had been previously advantageously used for boiling straw and other fibrous materials of similar character and texture in open vessels, in which the heat could be raised only to 212� Fahrenheit, might by the use of a much higher degree of heat, not less than 310� Fahrenheit, be advantageously and greatly increased, while the lessening of

Page 90 U. S. 592

the time the fiber was subjected to the action of the caustic alkaline solution, and the use of the weaker solution, which could thus be advantageously used, would be less injurious to the fiber as well as more economical in its use and application. This was the discovery or principle to be developed and practically applied, and he embodied that principle and arranged and described the means of its practical application, for the purposes specified, in the mode and manner particularly described in this specification. This mode, he says, he prefers, and he recommends a particular construction of the boiler as proper to be used in the practical application of the leading idea and principle of his invention. But, aware that inferior forms may be devised by any mechanic, and that superior forms and modes of construction and application may be devised after the use of his process has become familiar, he very wisely makes his second claim broad enough to cover his actual discovery and invention, irrespective of the particular form or construction of the vessel in which the boiling process might be carried on."

Assuming this construction, which accorded in essential parts with the construction of the court below, to be correct, and assuming also the patent to be valid, there remained the question of infringement of this Mellier patent.

On this point it appeared that the defendants chiefly used bamboo (which they disintegrated by blowing through a steam gun), as their chief material for making pulp, straw being perhaps used also sometimes; and it appeared that while using a caustic alkaline solution of the general strength of from two and a half to three degrees Baume, they occasionally -- though only occasionally -- used an external pressure, as measured by the gauge, of from forty to sixty pounds; the latter being equal to an internal pressure of nearly seventy-five pounds, or a temperature of above 310�.

On the whole case, the court below held, as already stated, p. 90 U. S. 570:

1. That the reissues, Nos. 1448 and 1449, of the Watt & Burgess patents, were void: the first as claiming what was not new, the second as being for a different invention from the original.

2. That there was no infringement of the Keen boiler chanrobles.com-red

Page 90 U. S. 593

patents, both the patents being for combinations, and all parts of the combinations not being used in the alleged infringement of either patent.

3. That the Mellier patent was to be construed in the way already stated as the one in which the court below construed it, and that so construed it had been infringed.

An injunction was accordingly awarded.