49 C.F.R. PART 551—PROCEDURAL RULES
Title 49 - Transportation
Authority: Secs. 110(e), 119, 80 Stat. 719, 728 (15 U.S.C. 1399, 1407); 23 U.S.C. 315, 401–404; delegation of authority, 31 FR 13952, 32 FR 5606.
Source: 33 FR 19700, Dec. 25, 1968, unless otherwise noted. Redesignated at 35 FR 5118, Mar. 26, 1970.
This part contains rules of procedure generally applicable to the transaction of official business under the National Traffic and Motor Vehicle Safety Act of 1966, the Motor Vehicle Information and Cost Savings Act, and the Highway Safety Act of 1966. These rules apply in addition to the rules governing specific proceedings. In case of inconsistency with these general rules, the specific rules prevail. [33 FR 19700, Dec. 25, 1968. Redesignated at 35 FR 5118, Mar. 26, 1970, and amended at 38 FR 20086, July 27, 1973] Any communication in writing relating to official business (including formal documents) shall be on opaque and durable paper not larger than 9 by 14 inches in size. Tables, charts, or originals of other documents that are attached to communications shall be folded to this size, if possible. The left margin of communications shall be at least 1 Unless otherwise specified, communications shall be addressed to the Administrator, National Highway Traffic Safety Administration, U.S. Department of Transportation, 400 Seventh Street SW., Washington, DC 20590. Communications may not be addressed to a staff member's private address. [36 FR 1147, Jan. 23, 1971; 38 FR 20086, July 27, 1973] Each communication shall be signed in ink and shall disclose the full legal name and the address of the person signing it and, if he is an agent, of his principal. Communications and attachments thereto shall be in English. Any matter written in a foreign language will be considered only if accompanied by a translation into English. A translation shall bear a certificate by the translator certifying that he is qualified to make the translation; that the translation is complete except as otherwise clearly indicated; and that it is accurate to the best of the translator's knowledge and belief. The translator shall sign the certificate in ink and state his full legal name, occupation, and address. Source: 70 FR 45567, Aug. 8, 2005, unless otherwise noted.
Authority: 49 U.S.C. 30164.
The purpose of this subpart is to establish a procedure for foreign manufacturers, assemblers and importers of motor vehicles and motor vehicle equipment to designate an agent in the United States on whom service of administrative or judicial notices or processes may be made. (a) All foreign manufacturers, assemblers, and importers of motor vehicles or motor vehicle equipment (hereinafter referred to as “foreign manufacturers”) must comply with this subpart before offering a motor vehicle or item of motor vehicle equipment for importation into the United States. (b) Unless and until a foreign manufacturer appoints an agent in accordance with the requirements of this subpart, it may not import motor vehicles or motor vehicle equipment into the United States. Only an individual, a domestic firm or a domestic corporation that is a permanent resident of the United States may serve as an agent under this subpart. (a) Generally no; an agent must be a permanent resident of the United States. Typically officials of foreign manufacturers and importers are not United States residents. (b) Occasionally an official of a foreign manufacturer also serves as an official of a domestic firm or corporation or is a permanent resident of the United States. In such cases, the official may serve as agent and sign the designation documents both on behalf of the foreign manufacturer and as agent. However, the foreign manufacturer must submit to NHTSA, along with the designation documents, a letter explaining that the individual signing the designation is both an official of the foreign manufacturer with authority to appoint an agent and a permanent resident of the United States or official of a domestic firm or corporation. If NHTSA does not receive an explanatory letter at the same time it receives the designation, the agency will deem the designation insufficient under this subpart and reject the submission. (a) Yes, a foreign manufacturer may replace its agent in the same way it originally designated the agent. It must submit designation documents that meet the form and content requirements identified in the following section of this subpart. Until NHTSA receives designation documents meeting those requirements or a letter withdrawing an existing designation, the individual or domestic corporation originally designated will continue to serve as its agent for service of process. (b) A foreign manufacturer that has withdrawn but not replaced its agent may not continue to import motor vehicles or motor vehicle equipment into the United States. In order to do so, it must appoint a new agent in accordance with the requirements of this subpart. Yes, any number of foreign manufacturers separately may designate the same person as agent. No, an agent may not assign performance of its functions. (a) A designation of agent remains in effect until replaced or withdrawn by a foreign manufacturer. (b) A foreign manufacturer that has withdrawn but not replaced its agent may not continue to import motor vehicles or motor vehicle equipment into the United States. In order to do so, it must appoint a new agent in accordance with the requirements of this subpart. (a) All documents submitted under this subpart must be: (1) Original documents; (2) Written in English; and (3) Signed in ink. (b) For each signature, the document must indicate in English: (1) The date of signature; and (2) The name and title of the individual who signed the document. (c) As long as documents submitted by a foreign manufacturer and its agent contain all required information (identified in §§551.54, 551.55 and 551.56 below), there is no mandatory format for the designation (d) NHTSA encourages foreign manufacturers to use the suggested designation form set forth in the Appendix to this subpart. If completed and executed properly by both a foreign manufacturer and its agent, this form will comply fully with the requirements of §§551.53 through 551.65. The suggested designation form set forth in the Appendix, if completed and signed properly by a foreign manufacturer and its agent, contains all of the information necessary to create a valid designation under this subpart. Specifically, a valid designation must contain: (a) A Designation by Foreign Manufacturer; and (b) An Acceptance by Agent. A Designation by Foreign Manufacturer must contain: (a) A statement that the designation is in valid form and binding on the foreign manufacturer under the laws, corporate bylaws or other requirements governing the making of designations at the place and time where it is made; (b) The full legal name, principal place of business and mailing address of the foreign manufacturer; (c) All trade or brand names, marks, logos or other designations of origin under which the foreign manufacturer's products will be sold; and (d) The signature in ink, and the name and title of the official or employee signing the designation on behalf of the foreign manufacturer, who must have authority to appoint an agent. An Acceptance by Agent must contain: (a) The full legal name, mailing address and telephone number of the agent; (b) A statement that the agent accepts the designation and understands that (s)he may not assign performance of the agent's functions under the designation to another person or entity, and that the designation shall remain in effect until it is withdrawn or replaced by the foreign manufacturer; (c) The signature in ink of the agent, or an official or employee of the domestic firm or corporation serving as the agent, who must authority to sign for the firm or corporation; and (d) The name and title of the individual signing the acceptance. Only an official or employee of the foreign manufacturer with authority to appoint an agent may sign the Designation by Foreign Manufacturer. Only the agent, in the case of an individual, or an official or employee, in the case of a domestic firm or corporation serving as the agent with authority to sign for that firm of corporation, may sign the Acceptance of Agent. (a) Generally no; the Designation by Manufacturer must be signed by an official or employee of the foreign manufacturer and the Acceptance by Agent must be signed by the foreign manufacturer's agent, in the case of an individual, or by an official or employee, in the case of a domestic firm or corporation serving as its agent. (b) Occasionally an official of a foreign manufacturer also serves as an official of a domestic firm or corporation or is a permanent resident of the United States. In such cases, the official may serve as agent and sign the designation documents both on behalf of the foreign manufacturer and as agent. However, the foreign manufacturer must submit to NHTSA, along with the designation documents, a letter explaining that the individual signing the designation is both an official of the foreign manufacturer with authority to appoint an agent and a permanent resident of the United States or official of a domestic firm or corporation. If NHTSA does not receive an explanatory letter at the same time it receives the designation, the agency will deem the designation insufficient under this subpart and reject the submission. (a) The foreign manufacturer must sign the Designation by Foreign Manufacturer on or before the date that the agent signs the Acceptance by Agent. It is not possible for an individual or entity to accept a designation as agent until on or after the date on which a foreign manufacturer makes the designation. (b) If the Designation by Foreign Manufacturer is dated after the Acceptance by Agent, NHTSA will deem the designation insufficient under this subpart and reject the submission. (a) The agent, in the case of an individual, or an employee or official, in the case of a domestic firm or corporation serving as agent, must sign the Acceptance by Agent on or after the date that the manufacturer signs the Designation by Foreign Manufacturer. It is not possible for an individual or entity to accept a designation as agent until on or after the date on which the foreign manufacturer makes the designation. (b) If the Acceptance by Agent is dated before the Designation by Foreign Manufacturer, NHTSA will deem the designation insufficient under this subpart and reject the submission. Foreign manufacturers must mail their designations to the Office of the Executive Secretariat, National Highway Traffic Safety Administration, Room 5221, 400 Seventh Street, SW, Washington, DC 20590. No other NHTSA office is authorized to accept designation documents. To avoid delays, the agency suggests using express mail services. No, the statute requires designation documents submitted by foreign manufacturers to contain original ink signatures. NHTSA will reject designation documents submitted via email or facsimile, as they do not satisfy this requirement. Designations of agent are binding on the foreign manufacturer even when their form and contents do not comply with this subpart, unless rejected by the agency. (a) A foreign manufacturer must provide written notice to NHTSA of any changes in its name, address or marks, trade names, or other designations of origin appearing on its products. (b) Foreign manufacturers should mail notices to the Office of the Executive Secretariat, National Highway Traffic Safety Administration, Room 5221, 400 Seventh Street, SW., Washington, DC 20590. To avoid delays, the agency suggests using express mail services. Service on an agent of administrative or judicial notices or process is deemed to be service on a manufacturer. An agent may be served at the agent's office or usual place of residence, by registered or certified mail addressed to the agent with return receipt requested, or by any other manner authorized by law. If an agent cannot be served because the agent cannot be located, has ceased to exist or does not receive correctly addressed mail, service may be made by posting the notice or process in the Office of the Secretary of Transportation.
Title 49: Transportation
PART 551—PROCEDURAL RULES
Section Contents
§ 551.1 Scope.
§ 551.31 Form of communications.
§ 551.33 Address of communications.
§ 551.35 Subscription of communications.
§ 551.37 Language of communications.
Designation of an Agent for Service of Process
§ 551.45 What is the purpose of this subpart?
§ 551.46 Who must comply with this subpart and when?
§ 551.47 Who may serve as an agent for a foreign manufacturer?
§ 551.48 May an official of a foreign manufacturer serve as its agent?
§ 551.49 May a foreign manufacturer replace its agent?
§ 551.50 May more than one foreign manufacturer designate the same person as agent?
§ 551.51 May an agent assign performance of its functions to another individual or entity?
§ 551.52 How long will a foreign manufacturer's designation of agent remain in effect?
Form and Contents of Designation
§ 551.53 What is the required format for a designation?
§ 551.54 What are the required contents for a designation?
§ 551.55 What information must a Designation by Foreign Manufacturer contain?
§ 551.56 What information must an Acceptance by Agent contain?
§ 551.57 Who may sign the Designation by Foreign Manufacturer?
§ 551.58 Who may sign the Acceptance by Agent?
§ 551.59 May the same individual sign both the Designation by Foreign Manufacturer and Acceptance by Agent?
§ 551.60 When must the Designation by Foreign Manufacturer be signed?
§ 551.61 When must the Acceptance by Agent be signed?
§ 551.62 Where should a foreign manufacturer mail the designation?
§ 551.63 May a foreign manufacturer submit a designation by email or facsimile?
§ 551.64 What if designation documents submitted by a foreign manufacturer do not comply with this subpart?
§ 551.65 What if a foreign manufacturer changes its name, address or product names or marks?
Method of Service of Process
§ 551.66 What is the legal effect of service of process on an agent?
§ 551.67 Where and how may an agent be served?
§ 551.68 What if an agent cannot be served?
Subpart A—General
top
§ 551.1 Scope.
top
Subpart B [Reserved]
top
Subpart C—Submittals in Writing
top
§ 551.31 Form of communications.
top
§ 551.33 Address of communications.
top
§ 551.35 Subscription of communications.
top
§ 551.37 Language of communications.
top
Subpart D—Service of Process on Foreign Manufacturers and Importers
top
Designation of an Agent for Service of Process
top
§ 551.45 What is the purpose of this subpart?
top
§ 551.46 Who must comply with this subpart and when?
top
§ 551.47 Who may serve as an agent for a foreign manufacturer?
top
§ 551.48 May an official of a foreign manufacturer serve as its agent?
top
§ 551.49 May a foreign manufacturer replace its agent?
top
§ 551.50 May more than one foreign manufacturer designate the same person as agent?
top
§ 551.51 May an agent assign performance of its functions to another individual or entity?
top
§ 551.52 How long will a foreign manufacturer's designation of agent remain in effect?
top
Form and Contents of Designation
top
§ 551.53 What is the required format for a designation?
top
§ 551.54 What are the required contents for a designation?
top
§ 551.55 What information must a Designation by Foreign Manufacturer contain?
top
§ 551.56 What information must an Acceptance by Agent contain?
top
§ 551.57 Who may sign the Designation by Foreign Manufacturer?
top
§ 551.58 Who may sign the Acceptance by Agent?
top
§ 551.59 May the same individual sign both the Designation by Foreign Manufacturer and Acceptance by Agent?
top
§ 551.60 When must the Designation by Foreign Manufacturer be signed?
top
§ 551.61 When must the Acceptance by Agent be signed?
top
§ 551.62 Where should a foreign manufacturer mail the designation?
top
§ 551.63 May a foreign manufacturer submit a designation by email or facsimile?
top
§ 551.64 What if designation documents submitted by a foreign manufacturer do not comply with this subpart?
top
§ 551.65 What if a foreign manufacturer changes its name, address or product names or marks?
top
Method of Service of Process
top
§ 551.66 What is the legal effect of service of process on an agent?
top
§ 551.67 Where and how may an agent be served?
top
§ 551.68 What if an agent cannot be served?
top
