---

16 C.F.R. PART 1209--INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION

TITLE 16--Commercial Practices

CHAPTER II--CONSUMER PRODUCT SAFETY COMMISSION

SUBCHAPTER B--CONSUMER PRODUCT SAFETY ACT REGULATIONS

PART 1209--INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION

Subpart A--THE STANDARD

�1209.1

Scope and application.

�1209.2

Definitions and measurements.

�1209.3

General requirements.

�1209.4

Test procedures for determining settled density.

�1209.5

Test procedures for corrosiveness.

�1209.6

Test procedures for critical radiant flux.

�1209.7

Test procedures for smoldering combustion.

�1209.8

Procedure for calibration of radiation instrumentation.

�1209.9

Labeling requirement.

�1209.10

Certification and enforcement.

�1209.11

Effective date.

Appendix

Figure 1 to Subpart A of Part 1209--Partial Insulation Preparation Apparatus

Appendix

Figure 2 to Subpart A of Part 1209--Cyclone Receiver Weldment

Appendix

Figure 3 to Subpart A of Part 1209--Flooring Radiant Tester Schematic Side Elevation

Appendix

Figure 4 to Subpart A of Part 1209--Flooring Radiant Panel Tester Schematic Low Flux End, Elevation

Appendix

Figure 5 to Subpart A of Part 1209--Zero Reference Point Related to Detecting Plane

Appendix

Figure 6 to Subpart A of Part 1209--Dummy Specimen in Specimen Holder

Appendix

Figure 7 to Subpart A of Part 1209--Specimen Tray

Appendix

Figure 8 to Subpart A of Part 1209--Standard Radiant Heat Energy Flux Profile

Appendix

Figure 9 to Subpart A of Part 1209--Flux Profile Data Log Format

Appendix

Figure 10 to Subpart A of Part 1209--Insulation Radiant Panel Test Data Log Format

Subpart B--CERTIFICATION

�1209.31

Purpose and applicability.

�1209.32

Definitions.

�1209.33

Reasonable testing program.

�1209.34

Qualification testing.

�1209.35

Product specification.

�1209.36

Production testing.

�1209.37

Corrective actions.

�1209.38

Records.

�1209.39

Certification of compliance.

�1209.40

Certification responsibility, multiple parties.

�1209.41

Effective date.